Inspection method for oil bushing manufacturer

    What are the detection methods of oil casing pipe ? Let's take a brief look:

    1. Ultrasonic testing

    When ultrasonic waves are spread in the tested raw materials, the acoustic characteristics of the raw materials and the changes in the internal organization have a positive impact on the spread of the ultrasonic waves. After detecting the affected levels and conditions of the ultrasonic waves, the changes in the function and structure of the raw materials are understood .

    2. Radiographic inspection

    Radiographic inspection uses the difference in the amount of radiation transmitted between the normal part and the defective part to form the resolution of the blackness on the negative.

    3. Penetrant test

    Penetrant test is to use the capillary action of liquid to permeate the penetrant into the opening on the surface of the solid raw material, and then draw the penetrant penetrant to the surface through the developer to show the existence of the defect. Penetration testing is suitable for a variety of metal and ceramic workpieces, and the time from penetration manipulation to the appearance of defects is relatively short, usually about half an hour. It may be useful to detect surface fatigue, stress corrosion and welding cracks, and to directly measure the size of cracks.

    4. Magnetic particle detection

    Magnetic particle detection is to use magnetic flux leakage to absorb magnetic particles and form magnetic marks to provide defect manifestation. It can detect surface and subsurface defects. The nature of defects is easy to distinguish. Paint and electroplated surfaces do not affect the detection vividness.

    5. Eddy current detection

    If the eddy current detection mainly uses the eddy current induced in the workpiece by the ferromagnetic coil to analyze the internal quality of the workpiece, it can detect the shortcomings of the surface and near surface of various conductive raw materials, the usual parameter control is troublesome, and the detection results are difficult to explain. Moreover, it is required that the detection object must be a conductive crack, and the length of the fault can be measured euphemistically.

    6. Magnetic flux leakage detection

    Magnetic flux leakage detection of petroleum casing is based on the characteristics of high permeability of ferromagnetic materials. Basically, the quality of in-service petroleum casing is tested by measuring the permeability change caused by defects in ferromagnetic materials .

    7. Magnetic impression detection

    Magnetic impression detection is derived from the relationship between the physical nature of the magnetic phenomenon of metals and the dislocation process. It has many advantages such as high utilization, low cost, and no grinding. It has an important and ordinary application prospect in the industry.

    In order to improve the service life of oil well pipes and reduce costs, oilfields require oil well pipes to be reused multiple times, which puts forward requirements for excellent anti-stick performance of oil pipes. If the oil pipe is stuck, the integrity of the thread connection will be damaged. Continued use may cause leakage at the thread connection and decrease the connection strength. Serious problems such as falling off the well may cause huge economic losses to the oilfield.

    The API specification requires that the tubing can be shackled 6 times without sticking when in use. Although the well conditions of each oil field are different, the conditions of the buckle (the method of buckle, the torque of the buckle and the speed of the buckle) are not the same when the tubing goes down. The requirements for the number of trips on the tubing are different. It is required that the number of trips of the oil pipe can reach more than 10 times, and some oilfields require more than 30 times.

    http://www.xysteelpipe.com/info/Inspection-method-for-oil-bushing-manufacturer-1641-1.htm