16mn seamless steel tube is widely used

    16 mn seamless steel tube is widely used in combustible and flammable fluid pipeline and boiler, steel structure. This is not to deceive consumers fakes, but according to the requirements of the equipment and produce steel pipe, seamless steel pipe between pure seamless and welded pipe, the quality is better than that of welded pipe, the cost is lower than the pure seamless, is an ideal substitute products. Production of the developed countries in the world has been extensively used in fluid pipe, boiler tube welded pipe seamless process, with the development of the society, the domestic situation of hot rolled welded pipe instead of seamless tube gradually has formed.

    1, the principle of 16 mn seamless steel tube stacking requirements are on the premise of pallet firm, ensure safety, do according to the bottle, pallet specifications, different varieties, different materials, different specifications of the spiral welded steel pipe to pallet respectively, prevent the erosion of muddied and each other.

    2.16 mn low forbidden deposit around the steel pipe piling location for steel tube erosion.

    3. The bottom of the spiral welded steel pipe pile should be mat tall, strong, smooth, prevent the material to be affected with damp be affected with damp or deformation.

    4. The same material of the spiral welded steel pipe needs according to the order of warehouse stacking, easy to implement the principle of improving predecessors starts.

    5. Such as 16 mn seamless steel tube pile up in the open, must under the spiral steel tube to prevent the wood or stone, and buttress face should be tilted slightly, to facilitate drainage, and pay attention to whether or not steel pipe lay flat, prevent the steel tube bending deformation.

    6. The spiral steel pipe stacking height, artificial homework no more than 1.2 m, mechanical work no more than 1.5 m, crib is not more than 2.5 m wide.

    7. Between the spiral welded steel pipe pile and pile should have certain channels, check the width of the road in 0.5 m or so commonly, in and out of the channel width and transport machinery, according to the volume of material in commonly 1.5 to 2 m.

    8.16 mn seamless steel tube pile bottom pad high level according to the specific situation, if the warehouse to the cement ground in xiangyang, higher height of 0.1 m; If the mud, must be 0.2 to 0.5 m high. If stored in the open, cement floor MATS should be from 0.3 to 0.3 m high, high silt ground pad should be from 0.5 to 0.5 m.